OEM High Quality Transformer Cut Out Fuse Supplier – Aluminum Copper and Bimetallic type Connectors – Changan Group
OEM High Quality Transformer Cut Out Fuse Supplier – Aluminum Copper and Bimetallic type Connectors – Changan Group Detail:
Technical Data
| Model | Conductor Cross-section(mm2)
Cu 6-50 Al 16-70 |
Bolts |
| CAPG-A1 | Cu 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Cu 6-50 Al 16-70 | 1×M8×45 |
| CAPG-B1 | Cu 10-95 Al 25-150 | 2×M8×45 |
| CAPG-B2 | Cu 25-185 Al 35-200 | 2×M8×50 |
| CAPG-B3 | Cu 6-50 Al 16-70 | 2×M10×60 |
| CAPG-C1 | Cu 10-95 Al 25-150 | 3×M8×45 |
| CAPG-C2 | Cu 25-185 Al 35-240 | 3×M8×50 |
| CAPG-C3 | Cu 35-240 Al 35-300 | 3×M10×60 |
| CAPG-C4 | 3×M10×70 |
Material
High strength aluminum alloy by forging. Surface treatment: Bright.
Product property
ALPG is used for connecting or branching AAC, AAAC or ACSR overhead conductors. Forging creates a high strength clamp. Slotted holes allow adjustment for varying conductors on each side. Its type test is in accordance with IEC61238-1.
Technical Data
|
Model |
Conductor Cross-section(mm2) | Bolts |
|
APG-A1 |
Al 16-70 | 1×M8×40 |
|
APG-A2 |
Al 16-150 | 1×M8×45 |
|
APG-B1 |
Al 16-35 | 2×M6×35 |
|
APG-B2 |
Al 16-70 | 2×M8×45 |
|
APG-B3 |
Al 16-150 | 2×M8×50 |
|
APG-B4 |
Al 25-185 | 2×M10×60 |
|
APG-C1 |
Al 16-70 | 3×M8×45 |
|
APG-C2 |
Al 16-150 | 3×M8×50 |
|
APG-C3 |
Al 25-240 | 3×M10×60 |
|
APG-C4 |
Al 35-300 | 3×M10×70 |
Parallel Groove Clamps Copper Extruded type
The clamp was designed to connect two parallel bare conductors. Conductors can be copper stranded or rods. Material is forged copper for copper to copper connection throughout the conductor range. The clamps have serrated transverse grooves for maximum conductor contact, use copper bolts and utilise Belleville washers to prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibitor. And stainless botls and nuts with washers was on requirement.
For tap-off connections of copper-conductors acc. to DIN 48201
Material
Body: Copper alloy
Bolts: steel or stainless steel Nuts: DIN 934, steel Surface: uncoated
| Model | Bolt Torque | Conductor Range mm2 | Dimensions mm O.D | No./Size of Bolts |
| CU6-70-2 | 20Nm | 6 to 70 | 2.7 to 10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 to 95 | 5.1 to 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 to 150 | 5.1 to 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 to 240 | 15.7 to 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 to 400 | 22.6 to 26.7 | 3×M12 |
Product detail pictures:
Related Product Guide:
Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for OEM High Quality Transformer Cut Out Fuse Supplier – Aluminum Copper and Bimetallic type Connectors – Changan Group , The product will supply to all over the world, such as: Mexico, Ghana, belarus, With the development and enlargement of mass clients abroad, now we've set up cooperative relationships with many major brands. We've our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost items and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
By Antonio from Karachi - 2017.08.16 13:39
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Dorothy from New Delhi - 2018.09.12 17:18
