OEM High Quality Single Phase Fuse Box Factory – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group
OEM High Quality Single Phase Fuse Box Factory – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group Detail:
Technical Data
Electrical Features
| Mode | Electromagnetic | ||
| Type(wave form of the earth leakage sensed)
Rated current In |
B
25,40,63,80,100A |
||
| Poles | 2P,4P | ||
| Rated voltage Ue | 2P 240V~, 4P 415V~ | ||
| Insulation voltage Ui | 500V | ||
| Rated frequency | 50/60Hz | ||
| Rated residual operation current(I△n) | 30, 100, 300mA | ||
| Rated residual making and breaking capacity (I△m) | 500A(In≤40A), 10In(In＞40A) | ||
| Short-circuit current Inc= I△c | 10,000A 10000 | ||
| SCPD fuse | |||
| Break time under I△n Rated impulse withstand voltage(1.5/50) Uimp | ≤0.1s 4000V | ||
| Dielectric test voltage at ind.Freq. for 1min | 2.5kV | ||
| Electrical life | 2,000 Cycles | ||
| Mechanical life | 4,000 Cycles | ||
Installation
| Contact position indicator | Yes |
| Protection degree
Ambient temperature(with daily average≤35℃) |
IP20
-5℃~+40℃ |
| Storage temperature | -25℃~+70℃ |
| Terminal connection type | Cable/Pin-type busbar/U-type busbar |
| Terminal size top/bottom for cable | 35mm2 18-3AWG |
| Terminal size top/bottom for busbar | 35mm2 18-3AWG |
| Tightening torque | 2.5Nm 22In-lbs |
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device |
| Connection | Power supply in both directions |
Tripping Current Range
|
Lagging Angle 0° |
I△n＞0.01A 0.35I△n≤I△≤1.4I△n |
I△n≤0.01A 0.35I△n≤I△≤2I△n |
| 90° |
0.25I△n≤I△≤1.4I△n |
0.25I△n≤I△≤2I△n |
| 135° |
0.11I△n≤I△≤1.4I△n |
0.11I△n≤I△≤2I△n |
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for OEM High Quality Single Phase Fuse Box Factory – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group , The product will supply to all over the world, such as: The Swiss, Belgium, Uzbekistan, The quality of our products is equal to OEM's quality, because our core parts are the same with OEM supplier. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order.
By Dee Lopez from Venezuela - 2018.11.28 16:25
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Aurora from Manila - 2018.10.09 19:07
Write your message here and send it to us
