OEM High Quality Metal Push Button Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group
OEM High Quality Metal Push Button Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group Detail:
Technical Data
Electrical Features
| Mode | Electromagnetic | ||
| Type(wave form of the earth leakage sensed)
Rated current In |
B
25,40,63,80,100A |
||
| Poles | 2P,4P | ||
| Rated voltage Ue | 2P 240V~, 4P 415V~ | ||
| Insulation voltage Ui | 500V | ||
| Rated frequency | 50/60Hz | ||
| Rated residual operation current(I△n) | 30, 100, 300mA | ||
| Rated residual making and breaking capacity (I△m) | 500A(In≤40A), 10In(In＞40A) | ||
| Short-circuit current Inc= I△c | 10,000A 10000 | ||
| SCPD fuse | |||
| Break time under I△n Rated impulse withstand voltage(1.5/50) Uimp | ≤0.1s 4000V | ||
| Dielectric test voltage at ind.Freq. for 1min | 2.5kV | ||
| Electrical life | 2,000 Cycles | ||
| Mechanical life | 4,000 Cycles | ||
Installation
| Contact position indicator | Yes |
| Protection degree
Ambient temperature(with daily average≤35℃) |
IP20
-5℃~+40℃ |
| Storage temperature | -25℃~+70℃ |
| Terminal connection type | Cable/Pin-type busbar/U-type busbar |
| Terminal size top/bottom for cable | 35mm2 18-3AWG |
| Terminal size top/bottom for busbar | 35mm2 18-3AWG |
| Tightening torque | 2.5Nm 22In-lbs |
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device |
| Connection | Power supply in both directions |
Tripping Current Range
|
Lagging Angle 0° |
I△n＞0.01A 0.35I△n≤I△≤1.4I△n |
I△n≤0.01A 0.35I△n≤I△≤2I△n |
| 90° |
0.25I△n≤I△≤1.4I△n |
0.25I△n≤I△≤2I△n |
| 135° |
0.11I△n≤I△≤1.4I△n |
0.11I△n≤I△≤2I△n |
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for OEM High Quality Metal Push Button Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group , The product will supply to all over the world, such as: Argentina, Dominica, Marseille, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Alma from Denmark - 2017.04.18 16:45
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Ruth from Serbia - 2018.06.18 17:25
Write your message here and send it to us
