OEM High Quality Distribution Board Main Switch Manufacturers – Insulation Piercing Connectors – Changan Group

Short Description:

Product Detail

Product Tags

Feedback (2)

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Button Switch Box, Mcb Distribution Box, Branch Circuit Breaker, We have now four leading solutions. Our products are most effective sold not only during the Chinese market, but also welcomed during the international industry.

OEM High Quality Distribution Board Main Switch Manufacturers – Insulation Piercing Connectors – Changan Group Detail:

General of insulation piercing connector(IPC)

1.Piercing connector, simple installation, need not strip the cable coat
2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead
3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector
4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al
5.Small electric connecting resistance, connecting resistance less than 1.1 times of the resistance of branch conductor with the same length
6.Special insulated case body, resistandce to illumination and environmental aging, the insulation strength can up to 12KV
7.Arc surface design, apply to connection with the same(diﬀerent) diameter, wide connection scope(0.75mm2~400mm2)

(Performance testing)

1.Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB 2314-1997
2.Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead
3.Heat circle performance: conforms to GB/T 2317.3-2000, the heat circle trial standard for electric ﬁtting
4.Waterproof insulation performance: conforms to the relevant requirements in Part 2 of GB/T 13140.4-1998
5.Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing
6.Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and heat impulse for six weeks
7.Fire-proof performance: insulation material of the connector withstands glowing ﬁlament test. Conform to the requirements in Chapter 4-10 of GB/T 5169.4

Th e reason of choosing insulation piecring connector (IPC)

Simple installation
Con be branch of cable without striping the insulated coat and the joint is completely insulated. Make branch in the random location of cable without cutting oﬀ the main cable. Simple and reliable installation, just need sleeve spanner, can be installed with on live line.

Safe use
The joint has good resistance to distortion, quake, ﬁre, wet, electrochemical corrosion and aging, need no maintenance. Has been used successfully for 30 years.

Economical cost
Small installation space, save the cost of bridge and land construction. In structural application, there need no terminal box, junction box and return wire of cable, save cable cost. The cost of cables and clamps is lower than other power supply system.

Product type and application scope

KV Series products(Low voltage series)

Model	Main line section	Branch section	Nominal current	Outline size	Weight	Piercing depth
CA101	1.5-2.5	1.5-10	55	27×41×62	55	1.5-2
CAEP	16-95	1.5-10	55	27×41×62	55	1-2
CA2-95	16-95	4-35(50)	157	46×52×87	160	1.5-2
CA3-95	25-95	25-95	214	50×61×100	198	1.5-2
CA4-150	50-150	50-150	316	50×61×100	219	1.5-2.5

Model	Conductor Range(mm2 )		No.Bolt
	Main(Al/Cu)	Tap(Al/Cu)
JBC50-240	50-240	50-240	2
DCNL-1	10-95	1.5-10
DCNL-2	16-95	4-35
DCNL-3	25-120	25-95

(Simple installation)

Material: Plastic
Product property: It is used to waterproof and insulate the end of the conductor(0.6/1kV).

Model	CrossC-osencdtuioctno(rmm2 )
PC6-35	6-35
PC35-70	35-70
PC70-95	70-95
PC95-120	95-120
PC120-185	120-185

Insulated piercing connector

Material: High strength aluminium alloy, anti-UV plastic
A broad usage in the low voltage insulation lines, leading the branch connection to the main conductor. T-connection of low voltage insulation wtre service and cable branch connection for building distribution system. The material for the inside body is high strength aluminum alloy, and the insulation cover is used polyvinyl chloride(PVC). The connectors with specially designed contact teeth, are suitable for the connection of aluminum. Put the main conductor and branch conductor parallel into the teeth grooves of the clamp, tighten the bolts, pierce the insulation of two conductors to make the conductors connect.
The insulation cover functions as waterproof and sealing perfectly.
At the breaking force of the conductor, the connector will not be distorted and broken. At the rated current and short circuit, rising temperature of the connector should be less than the connecting conductor.

Model	Main Conductor Cross-section(mm2)	Tap Conductor Cross-section(mm2)
P1-71	35-95	4-54
CD-71	35-95	4-54
PC-150	35-150	4-50
P-71	35-95	4-50
P-72	35-95	2×(4-50)
P-150	70-150	2×(4-54)
P-151	16-150	6-95