OEM High Quality Contactor Coil Water Prool Manufacturers – Aluminum Copper and Bimetallic type Connectors – Changan Group
OEM High Quality Contactor Coil Water Prool Manufacturers – Aluminum Copper and Bimetallic type Connectors – Changan Group Detail:
Technical Data
| Model | Conductor Cross-section(mm2)
Cu 6-50 Al 16-70 |
Bolts |
| CAPG-A1 | Cu 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Cu 6-50 Al 16-70 | 1×M8×45 |
| CAPG-B1 | Cu 10-95 Al 25-150 | 2×M8×45 |
| CAPG-B2 | Cu 25-185 Al 35-200 | 2×M8×50 |
| CAPG-B3 | Cu 6-50 Al 16-70 | 2×M10×60 |
| CAPG-C1 | Cu 10-95 Al 25-150 | 3×M8×45 |
| CAPG-C2 | Cu 25-185 Al 35-240 | 3×M8×50 |
| CAPG-C3 | Cu 35-240 Al 35-300 | 3×M10×60 |
| CAPG-C4 | 3×M10×70 |
Material
High strength aluminum alloy by forging. Surface treatment: Bright.
Product property
ALPG is used for connecting or branching AAC, AAAC or ACSR overhead conductors. Forging creates a high strength clamp. Slotted holes allow adjustment for varying conductors on each side. Its type test is in accordance with IEC61238-1.
Technical Data
|
Model |
Conductor Cross-section(mm2) | Bolts |
|
APG-A1 |
Al 16-70 | 1×M8×40 |
|
APG-A2 |
Al 16-150 | 1×M8×45 |
|
APG-B1 |
Al 16-35 | 2×M6×35 |
|
APG-B2 |
Al 16-70 | 2×M8×45 |
|
APG-B3 |
Al 16-150 | 2×M8×50 |
|
APG-B4 |
Al 25-185 | 2×M10×60 |
|
APG-C1 |
Al 16-70 | 3×M8×45 |
|
APG-C2 |
Al 16-150 | 3×M8×50 |
|
APG-C3 |
Al 25-240 | 3×M10×60 |
|
APG-C4 |
Al 35-300 | 3×M10×70 |
Parallel Groove Clamps Copper Extruded type
The clamp was designed to connect two parallel bare conductors. Conductors can be copper stranded or rods. Material is forged copper for copper to copper connection throughout the conductor range. The clamps have serrated transverse grooves for maximum conductor contact, use copper bolts and utilise Belleville washers to prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibitor. And stainless botls and nuts with washers was on requirement.
For tap-off connections of copper-conductors acc. to DIN 48201
Material
Body: Copper alloy
Bolts: steel or stainless steel Nuts: DIN 934, steel Surface: uncoated
| Model | Bolt Torque | Conductor Range mm2 | Dimensions mm O.D | No./Size of Bolts |
| CU6-70-2 | 20Nm | 6 to 70 | 2.7 to 10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 to 95 | 5.1 to 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 to 150 | 5.1 to 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 to 240 | 15.7 to 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 to 400 | 22.6 to 26.7 | 3×M12 |
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization to the long-term to build together with shoppers for mutual reciprocity and mutual advantage for OEM High Quality Contactor Coil Water Prool Manufacturers – Aluminum Copper and Bimetallic type Connectors – Changan Group , The product will supply to all over the world, such as: Atlanta, Tajikistan, Hungary, Our company, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.
By Kim from Mecca - 2017.08.28 16:02
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Naomi from Manila - 2017.09.29 11:19
