ODM Panel Db Box Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group
ODM Panel Db Box Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group Detail:
Technical Data
Electrical Features
| Mode | Electromagnetic | ||
| Type(wave form of the earth leakage sensed)
Rated current In |
B
25,40,63,80,100A |
||
| Poles | 2P,4P | ||
| Rated voltage Ue | 2P 240V~, 4P 415V~ | ||
| Insulation voltage Ui | 500V | ||
| Rated frequency | 50/60Hz | ||
| Rated residual operation current(I△n) | 30, 100, 300mA | ||
| Rated residual making and breaking capacity (I△m) | 500A(In≤40A), 10In(In＞40A) | ||
| Short-circuit current Inc= I△c | 10,000A 10000 | ||
| SCPD fuse | |||
| Break time under I△n Rated impulse withstand voltage(1.5/50) Uimp | ≤0.1s 4000V | ||
| Dielectric test voltage at ind.Freq. for 1min | 2.5kV | ||
| Electrical life | 2,000 Cycles | ||
| Mechanical life | 4,000 Cycles | ||
Installation
| Contact position indicator | Yes |
| Protection degree
Ambient temperature(with daily average≤35℃) |
IP20
-5℃~+40℃ |
| Storage temperature | -25℃~+70℃ |
| Terminal connection type | Cable/Pin-type busbar/U-type busbar |
| Terminal size top/bottom for cable | 35mm2 18-3AWG |
| Terminal size top/bottom for busbar | 35mm2 18-3AWG |
| Tightening torque | 2.5Nm 22In-lbs |
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device |
| Connection | Power supply in both directions |
Tripping Current Range
|
Lagging Angle 0° |
I△n＞0.01A 0.35I△n≤I△≤1.4I△n |
I△n≤0.01A 0.35I△n≤I△≤2I△n |
| 90° |
0.25I△n≤I△≤1.4I△n |
0.25I△n≤I△≤2I△n |
| 135° |
0.11I△n≤I△≤1.4I△n |
0.11I△n≤I△≤2I△n |
Product detail pictures:
Related Product Guide:
The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for ODM Panel Db Box Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group , The product will supply to all over the world, such as: Manila, Kuwait, Manila, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
By Edwina from Riyadh - 2018.09.23 17:37
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Mag from Bulgaria - 2018.07.12 12:19
Write your message here and send it to us
