ODM Board Distribution Factories – SBH15 Series Amorphous Alloy Oil Immersed Transformer – Changan Group

Short Description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Control Voltage Transformer, Led Indicators, Fuse Cutout, Welcome to build the well and long standing business relationships with our company to create a glorious future together. customers' satisfaction is our eternal pursuit!

ODM Board Distribution Factories – SBH15 Series Amorphous Alloy Oil Immersed Transformer – Changan Group Detail:

Product introduction

Sbh15 series amorphous alloy transformer is a kind of oil immersed transformer with low loss and high energy efficiency. The core of the product is made of amorphous alloy strip, and its no-load loss is more than 70% lower than that of the traditional transformer with silicon steel sheet as core. It is a new generation of energy-saving, safe, green and environment-friendly high-tech product.
The product can replace the ordinary oil immersed transformer and is mainly used in high-rise buildings, commercial centers, subways, airports, stations, industrial and mining enterprises, power plants and other electric fields.

Model Meaning

SBH15 Series Amorphous Alloy Oil Immersed Transformer

Standards

GB/T 1094.1-2013 Power transformers – Part 1: General
GB/T 1094.2-2013 Power transformers – Part 2: Temperature rise for liquid-immersed transformers GB/T 1094.3-2017 Power transformers – Part 3:Insulation levels, dielectric tests and external clearances in air GB/T 1094.5-2008 Power transformers – Part 5: Ability to withstand short circuit
GB/T 1094.10-2003 Power transformers–Part 10: Determination of sound levels IEC60076-1:2011 Power transformers – Part 1: General
IEC60076-2:2011 Power transformers – Part 2: Temperature rise for liquid-immersed transformers
IEC 60076-3:2013+AMD1:2018 Power transformers – Part 3: Insulation levels, dielectric tests and external clearances in air IEC 60076-5:2006 Power transformers – Part 5: Ability to withstand short circuit
IEC 60076-10:2016 Power transformers – Part 10: Determination of sound levels

Normal Environment conditions

1.Ambient Temperature: No more than +40℃
No less than -25℃ The monthly average temperature is no more than +30℃ The yearly average temperature is no more than +20℃
2.Altitude: No more than 1000m. 3.The power supply voltage’s wave is similar to sine wave. 4.Three-phase power supply voltage is approximately symmetrical.
5.The total harmonic content of load current shall not exceed 5% of ratedcurrent; 6.Installation Site: Indoor or outdoor.

Product characteristics

1.The core is made of amorphous alloy strip, with low no-load loss.
2.The positioning structure is added to the body to avoid displacement during transportation. At the same time, all fasteners are equipped with fastening nuts to ensure that the fasteners are not loose during long-term operation.
3.This product is a fully sealed structure. The vacuum oil filling process is adopted when the transformer is packaged, which completely removes the moisture in the transformer, ensures the isolation of the transformer oil from the outside air, prevents the aging of the oil, and improves the operation reliability of the transformer. The product is equipped with pressure relief valve, signal thermometer, gas relay and so on to ensure the safe operation of the transformer.
4.The transformer oil tank is composed of corrugated wall, and the surface is sprayed with dust and the paint film is firm. Corrugated heat sink not only has cooling function, but also has “breathing” function. The elasticity of corrugated heat sink can compensate the change of transformer oil volume caused by temperature rise and fall. Therefore, there is no oil conservator in the fully sealed transformer, which reduces the overall height of the transformer.
5.The product is beautiful in appearance, small in volume and small in floor area. It is an ideal maintenance free product.

Transformer Product Selection (47)

SBH15 Technical Parameter

caRpaatecdity (kvA)30	Voltage combination tHiggeh Taapnpging Low(vol)tage			cognrnoeucpted label	diNssoi-ploaatidon (w)33	dissLiopaadtion (W)145℃ 630/600	Ncuor-rIoeandt (%)1.50	Imvpoeltdaagnece (%)	Outline dimension Length t(L)x wimdtmh ）(B)x	HorViGzoanutgaelland（eratxicba)400×550	W(ekig)ht 680
	vol a (kV)	r e	kV						heigh (H)（ 950×620×10401060×770×1070)
50	66.3 61.06 1101.5	±2±×52.5	0.4	Dyn11	43	910/870	1.20	4.0		400×660	890
63					50	1090/1040	1.10		1240×920×1200	550×870	1030
80					60	1310/1250	1.00		1240×920×1200	550×870	1170
100					75	1580/1500	0.90		1280×920×1200	550×870	1230
125					85	1890/1800	0.80		1320×940×1200	660×870	1400
160					100	2310/2200	0.60		1340×940×1200	660×870	1470
200					120	2730/2600	0.60		1340×940×1200	660×870	1540
250					140	3200/3050	0.60		1370×1120×1260	660×1070	1720
315					170	3830/3650	0.50		1370×1120×1330	660×1070	2000
400					200	4520/4300	0.50		1520×1190×1360	820×1070	2400
500					240	5410/5150	0.50		1890×1220×1470	820×1070	2950
630					320	6200	0.30		1960×1210×1550	820×1070	3500
800					380	7500	0.30	4.5	2030×1310×1560	820×1070	4100
1000					450	10300	0.30		2540×1350×1800	820×1070	5550
1250					530	12000	0.20		2080×1540×1970	1070×1475	6150
1600					630	14500	0.20		2560×1690×2380	1070×1475	6600
2000					750	18300	0.2		2660×1800×2400	1070×1475	6950
2500					900	21200	0.2	5	2720×1800×2460	1070×1475	7260