Famous Three Phase Power Distribution Box Supplier – Aluminum Copper and Bimetallic type Connectors – Changan Group
Famous Three Phase Power Distribution Box Supplier – Aluminum Copper and Bimetallic type Connectors – Changan Group Detail:
Technical Data
| Model | Conductor Cross-section(mm2)
Cu 6-50 Al 16-70 |
Bolts |
| CAPG-A1 | Cu 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Cu 6-50 Al 16-70 | 1×M8×45 |
| CAPG-B1 | Cu 10-95 Al 25-150 | 2×M8×45 |
| CAPG-B2 | Cu 25-185 Al 35-200 | 2×M8×50 |
| CAPG-B3 | Cu 6-50 Al 16-70 | 2×M10×60 |
| CAPG-C1 | Cu 10-95 Al 25-150 | 3×M8×45 |
| CAPG-C2 | Cu 25-185 Al 35-240 | 3×M8×50 |
| CAPG-C3 | Cu 35-240 Al 35-300 | 3×M10×60 |
| CAPG-C4 | 3×M10×70 |
Material
High strength aluminum alloy by forging. Surface treatment: Bright.
Product property
ALPG is used for connecting or branching AAC, AAAC or ACSR overhead conductors. Forging creates a high strength clamp. Slotted holes allow adjustment for varying conductors on each side. Its type test is in accordance with IEC61238-1.
Technical Data
|
Model |
Conductor Cross-section(mm2) | Bolts |
|
APG-A1 |
Al 16-70 | 1×M8×40 |
|
APG-A2 |
Al 16-150 | 1×M8×45 |
|
APG-B1 |
Al 16-35 | 2×M6×35 |
|
APG-B2 |
Al 16-70 | 2×M8×45 |
|
APG-B3 |
Al 16-150 | 2×M8×50 |
|
APG-B4 |
Al 25-185 | 2×M10×60 |
|
APG-C1 |
Al 16-70 | 3×M8×45 |
|
APG-C2 |
Al 16-150 | 3×M8×50 |
|
APG-C3 |
Al 25-240 | 3×M10×60 |
|
APG-C4 |
Al 35-300 | 3×M10×70 |
Parallel Groove Clamps Copper Extruded type
The clamp was designed to connect two parallel bare conductors. Conductors can be copper stranded or rods. Material is forged copper for copper to copper connection throughout the conductor range. The clamps have serrated transverse grooves for maximum conductor contact, use copper bolts and utilise Belleville washers to prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibitor. And stainless botls and nuts with washers was on requirement.
For tap-off connections of copper-conductors acc. to DIN 48201
Material
Body: Copper alloy
Bolts: steel or stainless steel Nuts: DIN 934, steel Surface: uncoated
| Model | Bolt Torque | Conductor Range mm2 | Dimensions mm O.D | No./Size of Bolts |
| CU6-70-2 | 20Nm | 6 to 70 | 2.7 to 10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 to 95 | 5.1 to 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 to 150 | 5.1 to 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 to 240 | 15.7 to 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 to 400 | 22.6 to 26.7 | 3×M12 |
Product detail pictures:
Related Product Guide:
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for Famous Three Phase Power Distribution Box Supplier – Aluminum Copper and Bimetallic type Connectors – Changan Group , The product will supply to all over the world, such as: Ethiopia, Pakistan, Congo, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Edwina from Kyrgyzstan - 2017.01.11 17:15
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Grace from British - 2018.11.28 16:25
