China Best Waterproof Distribution Box Factory – SBH15 Series Amorphous Alloy Oil Immersed Transformer – Changan Group
China Best Waterproof Distribution Box Factory – SBH15 Series Amorphous Alloy Oil Immersed Transformer – Changan Group Detail:
Product introduction
Sbh15 series amorphous alloy transformer is a kind of oil immersed transformer with low loss and high energy efficiency. The core of the product is made of amorphous alloy strip, and its no-load loss is more than 70% lower than that of the traditional transformer with silicon steel sheet as core. It is a new generation of energy-saving, safe, green and environment-friendly high-tech product.
The product can replace the ordinary oil immersed transformer and is mainly used in high-rise buildings, commercial centers, subways, airports, stations, industrial and mining enterprises, power plants and other electric fields.
Model Meaning
Standards
GB/T 1094.1-2013 Power transformers – Part 1: General
GB/T 1094.2-2013 Power transformers – Part 2: Temperature rise for liquid-immersed transformers GB/T 1094.3-2017 Power transformers – Part 3:Insulation levels, dielectric tests and external clearances in air GB/T 1094.5-2008 Power transformers – Part 5: Ability to withstand short circuit
GB/T 1094.10-2003 Power transformers–Part 10: Determination of sound levels IEC60076-1:2011 Power transformers – Part 1: General
IEC60076-2:2011 Power transformers – Part 2: Temperature rise for liquid-immersed transformers
IEC 60076-3:2013+AMD1:2018 Power transformers – Part 3: Insulation levels, dielectric tests and external clearances in air IEC 60076-5:2006 Power transformers – Part 5: Ability to withstand short circuit
IEC 60076-10:2016 Power transformers – Part 10: Determination of sound levels
Normal Environment conditions
1.Ambient Temperature: No more than +40℃
No less than -25℃ The monthly average temperature is no more than +30℃ The yearly average temperature is no more than +20℃
2.Altitude: No more than 1000m. 3.The power supply voltage’s wave is similar to sine wave. 4.Three-phase power supply voltage is approximately symmetrical.
5.The total harmonic content of load current shall not exceed 5% of ratedcurrent; 6.Installation Site: Indoor or outdoor.
Product characteristics
1.The core is made of amorphous alloy strip, with low no-load loss.
2.The positioning structure is added to the body to avoid displacement during transportation. At the same time, all fasteners are equipped with fastening nuts to ensure that the fasteners are not loose during long-term operation.
3.This product is a fully sealed structure. The vacuum oil filling process is adopted when the transformer is packaged, which completely removes the moisture in the transformer, ensures the isolation of the transformer oil from the outside air, prevents the aging of the oil, and improves the operation reliability of the transformer. The product is equipped with pressure relief valve, signal thermometer, gas relay and so on to ensure the safe operation of the transformer.
4.The transformer oil tank is composed of corrugated wall, and the surface is sprayed with dust and the paint film is firm. Corrugated heat sink not only has cooling function, but also has “breathing” function. The elasticity of corrugated heat sink can compensate the change of transformer oil volume caused by temperature rise and fall. Therefore, there is no oil conservator in the fully sealed transformer, which reduces the overall height of the transformer.
5.The product is beautiful in appearance, small in volume and small in floor area. It is an ideal maintenance free product.
SBH15 Technical Parameter
|
caRpaatecdity (kvA)30 |
Voltage combination tHiggeh Taapnpging Low(vol)tage | cognrnoeucpted label |
diNssoi-ploaatidon (w)33 |
dissLiopaadtion (W)145℃ 630/600 | Ncuor-rIoeandt (%)1.50 | Imvpoeltdaagnece (%) | Outline dimension Length t(L)x wimdtmh ）(B)x |
HorViGzoanutgaelland（eratxicba)400×550 |
W(ekig)ht 680 | ||
| vol a (kV) | r e |
kV |
heigh (H)（ 950×620×10401060×770×1070) | ||||||||
|
50 |
66.3 61.06 1101.5 | ±2±×52.5 | 0.4 | Dyn11 |
43 |
910/870 |
1.20 |
4.0 |
|
400×660 |
890 |
|
63 |
50 |
1090/1040 |
1.10 |
1240×920×1200 |
550×870 |
1030 | |||||
|
80 |
60 |
1310/1250 |
1.00 |
1240×920×1200 |
550×870 |
1170 | |||||
|
100 |
75 |
1580/1500 |
0.90 |
1280×920×1200 |
550×870 |
1230 | |||||
|
125 |
85 |
1890/1800 |
0.80 |
1320×940×1200 |
660×870 |
1400 | |||||
|
160 |
100 |
2310/2200 |
0.60 |
1340×940×1200 |
660×870 |
1470 | |||||
|
200 |
120 |
2730/2600 |
0.60 |
1340×940×1200 |
660×870 |
1540 | |||||
|
250 |
140 |
3200/3050 |
0.60 |
1370×1120×1260 |
660×1070 |
1720 | |||||
|
315 |
170 |
3830/3650 |
0.50 |
1370×1120×1330 |
660×1070 |
2000 | |||||
|
400 |
200 |
4520/4300 |
0.50 |
1520×1190×1360 |
820×1070 |
2400 | |||||
|
500 |
240 |
5410/5150 |
0.50 |
1890×1220×1470 |
820×1070 |
2950 | |||||
|
630 |
320 |
6200 |
0.30 |
1960×1210×1550 |
820×1070 |
3500 | |||||
|
800 |
380 |
7500 |
0.30 |
4.5 |
2030×1310×1560 |
820×1070 |
4100 | ||||
|
1000 |
450 |
10300 |
0.30 |
2540×1350×1800 |
820×1070 |
5550 | |||||
|
1250 |
530 |
12000 |
0.20 |
2080×1540×1970 |
1070×1475 |
6150 | |||||
|
1600 |
630 |
14500 |
0.20 |
2560×1690×2380 |
1070×1475 |
6600 | |||||
|
2000 |
750 |
18300 |
0.2 |
2660×1800×2400 |
1070×1475 |
6950 | |||||
|
2500 |
900 |
21200 |
0.2 |
5 |
2720×1800×2460 |
1070×1475 |
7260 | ||||
Product detail pictures:
Related Product Guide:
We always believe that one's character decides products' quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for China Best Waterproof Distribution Box Factory – SBH15 Series Amorphous Alloy Oil Immersed Transformer – Changan Group , The product will supply to all over the world, such as: Denver, Amsterdam, Lesotho, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.
By Adela from Chile - 2018.02.08 16:45
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Anastasia from Ghana - 2018.07.12 12:19
